Stamped concrete cost in Oklahoma City starts at $10.48 a square foot for a stamped patio with us. A stamped driveway starts at $12.57. A 300 square foot concrete patio runs $1,750 to $5,850 before the drive cost, which is our trip out to your site. Plain broom sits at the low end of that range, and a stamped patio with color sits near the top.
The per-foot prices on this page leave out setup and the drive.
Every price here is for a full-depth stamped pour. That means we press the pattern into wet concrete on the day we pour it. You can’t stamp a slab that has already cured, so know that before you price anything.
Price a stamped patio or price a stamped driveway. Stamped Finish is an option on the pour, so the calculator prices the slab and the stamp together.
What does stamped concrete cost by pattern?
The spread in stamped prices isn’t padding. It’s the gap between one pattern in one color and a layout with several patterns and hand-carved borders.
| Level | Typical patterns | Patio, per sq ft, from |
|---|---|---|
| Basic | One pattern, one color (broom border, basic ashlar, basket weave) | $10.48 |
| Medium | One pattern, integral color, a contrasting release (ashlar slate, random stone, European fan) | $12.00 |
| Premium / custom | Several patterns and colors, hand-carved borders, medallions | Priced per job |
Most OKC patios land in the medium level. That makes it the closest thing to an average stamped job here. That level buys ashlar slate or random stone, plus integral color. Integral color is mixed in at the batch plant, so it runs all the way through the slab. Right before the stamps come out, we throw a contrasting release agent over the surface. Think of the flour a baker dusts on a rolling pin. It keeps the mat from sticking, and the powder left in the low spots gives stamped concrete its two-tone, weathered-stone look. Skip the contrast and you get a one-color slab with a texture pressed into it. It looks like concrete pretending. The basic level is one pattern in one color, like a running bond brick border or a plain ashlar field. It’s the honest pick when the budget is tight.
The premium level keeps going from there. Think several patterns, three or more colors, hand-carved detail, or a custom logo. It’s pool decks tied into the coping, driveways with a compass rose medallion, and branded shop entries. These are design jobs. The concrete is the finish, and the layout gets drawn before anybody orders a truck. We price each one after we see the drawing, because it’s laid out by hand.
Cheap stamping jobs often look cheap
Stamping runs on a clock. Once the concrete starts to set, you get no second try. You can't move a stamp or even out the color. A rushed crew leaves uneven patterns, stamp lines you can see, and blotchy color, and its sealer can fail inside a year. If a bid comes in far below the rest, ask what's being skipped.
What do color and pattern add-ons cost?
| Add-on | Added cost per sq ft | Notes |
|---|---|---|
| Base color | Included | In the stamped finish |
| Release agent | Included | In the stamped finish; a second shade gives two tones |
| Integral color | $1.52 | Color runs all the way through |
| Second accent color | Priced per job | Masked, then its own coat |
| Hand-stained accents | Priced per job | After stamping, before sealer |
| Exposed aggregate border | Priced per job | Its own pour section |
| Seamless texture mats | Priced per job | Stone look with no joint lines |
| Saw-cut scoring or borders | $0.62 | Diamond blade, after the slab cures |
| Anti-slip additive in sealer | Priced per job | For pool decks and slopes |
Two rows are worth a second look. Seamless texture isn’t a downgrade, and it usually costs less than pattern mats. Texture mats give you natural stone with no joint lines, and that suits a modern house better than a brick pattern does. The anti-slip additive is the cheapest add-on on the list. Put it on any pool deck or sloped surface and stop thinking about it.
Everything else on that list is money spent on how the slab looks from ten feet away. Pick one accent, not three. The hand-done accents get their price once we see your layout.
Stamped concrete vs. pavers, plain concrete, and overlays
| Feature | Stamped concrete | Pavers | Plain concrete | Decorative overlay |
|---|---|---|---|---|
| Installed cost per sq ft | From $10.48 | $12 - $25 | From $6.55 | From $6.14 |
| Lifespan | 25 - 30 years | 25 - 50 years | 25 - 30 years | 10 - 15 years |
| Upkeep | Reseal every 2-3 years | Reset pavers, weed joints | Very little | Reseal every 2-3 years |
| Repairs | Patch is hard to match | Swap single pavers | Simple patch | Recoat worn spots |
| Looks | Wide (stone, brick, wood, slate, tile) | Wide (by material) | Few (broom, exposed aggregate) | Wide (stamps, stains, textures) |
| Install time | 2-4 days | 3-7 days | 1-2 days | 1-3 days |
| Resale value | High (looks like stone) | High | Moderate | Moderate |
Against pavers, stamped concrete gives you the stone or brick look for less money. Pavers win one thing outright: you can pull and replace a single paver. They lose on what comes after. Pavers settle, shift, and grow weeds in the joints. Oklahoma’s expansive clay, a soil that swells when it’s wet and shrinks when it dries, keeps the ground under them moving every season.
Against plain concrete, you’re paying for looks and nothing else. The slab under the stamp is the same slab. If the patio sits behind a privacy fence and nobody sees it, plain is a fair call.
What does a stamped concrete overlay cost?
A stamped concrete overlay starts at $6.14 a square foot with us. The difference from a new pour is depth. An overlay is a thin layer bonded to the slab you already have. Stamped overlays often run 1/4 to 3/8 inch, and our patterned overlay goes on at 1/8 inch. An overlay lasts 10 to 15 years. A full-depth stamped pour lasts 25 to 30. An overlay is for a sound slab you don’t want to tear out. It isn’t a cheaper copy of the same thing.
Why does stamped concrete cost less in Oklahoma City than on the coasts?
Stamped concrete in OKC runs 5 to 15% below coastal and northeast markets. Labor is the reason, and it’s the only one. Stamping is hand work, so labor is the biggest input on the job. Crew pay is what changes from one market to the next.
The materials don’t change. Ready-mix concrete runs $130 to $160 a cubic yard delivered almost anywhere in the country. Stamp mats, color, release agent, and sealer are factory products. They cost within pennies of each other from Tulsa to Tampa. When somebody says materials got expensive this year, they mean concrete. And that concrete costs the low bidder the same as the high one.
How does the drive from Prague change the price?
We’re based in Prague, Oklahoma, about halfway between OKC and Tulsa. Prague to OKC is about 70 miles, and Prague to Tulsa is about 65. Both carry our lowest drive cost, the charge for getting the crew and the gear to your site. On a quote it’s called mobilization. Stillwater and Muskogee sit inside 100 miles. Jobs past 100 miles, out toward Lawton or Enid, cost more to reach because of the travel time and the hauling.
One detail matters more than the miles. We figure the drive cost per project day, not per trip. A one-day, 300 square foot patio costs less to reach than a three-day, 2,000 square foot pool deck at the same address. A bigger job spreads that cost over more square feet.
Put your address in the quote tool and it figures the drive cost for you.
Keeping up the sealer is what makes stamped concrete last
Keep up the sealer. It's the most important thing you can do after we leave. Put a fresh coat on every 2 to 3 years, or when water stops beading on the surface. A good coat costs $0.30 to $0.50 a square foot. It guards against sun fade, freeze-thaw damage, and salt. Skipping it is the top reason stamped color fades and the surface wears early in Oklahoma weather.
Inside a stamped concrete quote
Included:
- Site layout and forms
- The pour: 4 inches at least for a patio, and 5 to 6 inches for a driveway
- Crack control: fiber in the mix on a patio, and a rebar grid on a driveway
- Basic dirt prep under the slab, plus a 4 inch gravel base on a driveway
- A base color and the release agent
- Stamping with professional mat sets
- The first sealer coat on a patio
- Cleanup and form removal
- Cure-time steps, so you know when you can walk on it and when you can park on it
Priced separately when your job needs it:
- Tearing out old concrete, $2.30 a square foot for a 4 inch slab with no rebar. A thicker slab, or one full of rebar, may cost more once we see it.
- Heavy grading or hauled-in fill beyond basic prep
- A rebar grid on a patio, $1.80 a square foot over the standard fiber
- Extra accent colors
- Drainage fixes, like a French drain
- Sealer on a driveway, which you pick in the quote tool
- Future reseals, at $0.30 to $0.50 a square foot each time
- A permit, where your city requires one
The tear-out line is the one that surprises people. A 300 square foot patio that replaces an old slab carries 300 square feet at $2.30 a foot before a single stamp comes out of the trailer.
How do you get your own stamped concrete price?
The online quote tool takes about 2 minutes. Enter your size, pick Stamped Finish on the pour, and add your address. It figures the concrete, the labor, and the drive cost for you. Start on the right one: stamped patio, stamped driveway, or any other stamped slab. It’s the fastest way to a real number, and nobody calls you afterward unless you ask.
Call (888) 852-3528 if your site has a quirk. Maybe it’s a slope that needs steps, or drainage we have to fix before the pour. Maybe it’s a pool deck that ties into old coping, or a pattern you saw somewhere and want matched.
Why do stamped concrete bids vary so much?
Three things set stamping crews apart, and none of them shows up as a line on the bid.
Tooling. A good stamp set costs $300 to $800. A crew with 30 or more patterns has $10,000 to $25,000 sitting in a trailer. That’s why one bidder can offer the pattern you actually want, and another steers you toward the three mats he owns.
Timing.
Stamping is the only decorative finish where the whole job rides on a window you can’t stretch. The concrete has to be firm enough to hold a print and soft enough to take one. In an Oklahoma summer, with the slab at 95 to 105 degrees, that window shrinks to 30 or 45 minutes across the whole pour. A crew that shows up short-handed starts stamping the near end while the far end is still too wet. By the time they reach the far end, it’s gone too dry. You see the result months later. The print depth is uneven, the seams show where mats overlapped, and the color looks blotchy in low afternoon sun. None of it can be fixed after the fact, because a patch on stamped concrete is hard to match. That’s why the low bid on a stamp job is the one worth reading twice.
Sealer care. The first coat goes on 24 to 48 hours after the pour, at 200 to 300 square feet per gallon. It needs to be above 50 degrees, with no rain in the forecast. Miss any of those and the sealer turns white, peels, or traps water under the film. Fixing a bad sealer job costs $2 to $4 a square foot. That’s a real chunk of what you paid for the patio in the first place.
The same care runs our Pour-4-Polish process. We plan the pour for the finish before the truck shows up. There’s no second chance at the finish. Want the numbers behind this page? Our cost research tracks the price per square foot and the labor hours across decorative work.
Does stamped concrete pay off over 20 years?
| Surface | Install cost (400 sq ft) | 20-year upkeep | 20-year total | Curb appeal |
|---|---|---|---|---|
| Stamped concrete | From $10.48 a sq ft | $840 - $1,400 (resealing) | Install plus reseals | High |
| Natural stone | $6,000 - $12,000 | $800 - $2,000 (resanding, leveling) | $6,800 - $14,000 | High |
| Brick pavers | $4,800 - $10,000 | $1,200 - $3,000 (resanding, weeds, leveling) | $6,000 - $13,000 | High |
| Plain concrete | From $6.55 a sq ft | $200 - $500 (crack sealing) | Install plus crack sealing | Moderate |
Run a 400 square foot patio out 20 years and the order changes. Stamped concrete takes $840 to $1,400 in resealing over two decades. Natural stone costs $6,000 to $12,000 to put in. Then it adds $800 to $2,000 in resanding and leveling. That’s $6,800 to $14,000 all in. Brick pavers cost less than stone to put in, but they need the most upkeep of the four. Plan on $1,200 to $3,000 for resanding, weed control, and leveling. The pavers settle one by one, and Oklahoma’s clay keeps moving under them. Plain concrete stays the cheapest, and it looks like plain concrete for all twenty of those years. Stamped costs more than a plain pour and less than natural stone. It’s also the one whose whole upkeep plan is a sealer coat. You can roll it on while the grill heats up.
Resale is the part nobody puts on a spreadsheet. A stamped patio looks like natural stone from the back door. That look does its work every time someone walks a buyer through the yard.
Related pages
- Stamped concrete services: patterns, how we do it, and the gallery
- Concrete patio cost: what the slab itself costs before the stamp
- Concrete driveway cost: driveway slab prices, with Stamped Finish as a finish option
- Decorative concrete: every decorative option side by side
Pick the pattern, pick the color, and let the tool price it. Get your price now: square footage, address, about 2 minutes, drive cost included.
