Concrete work on the Lee and Monroe county line
Nettleton straddles the Lee and Monroe county line, about 16 miles south of our North Mississippi team. As a concrete contractor in Nettleton, MS, we pour driveways and shop and barn slabs, coat garage floors, and polish concrete in homes and barndominiums. Nearly every job here is one of those four. When a slab is headed for polish or a coating, we write the pour spec for that finish before the truck arrives. Get your price now.
What kinds of jobs does Bel Covo pour around Nettleton?
Nettleton sits on the US-45 and US-278 bypass, where through traffic meets local roads. That keeps a working mix of jobs in front of us. It’s ag and equipment slabs, roadside commercial flatwork, and the detached shops and barndominiums going up on acreage out here.
Each one gets sorted at the quote into new concrete, a coating over a new or old slab, or a ground-and-polished floor. That choice comes first, because a slab meant for polish gets its spec at the pour, not patched into shape later.
How do we build a driveway or shop slab on Nettleton ground?
- Driveways and approaches. The soil here is Coastal Plain chert gravel over older Pleistocene terrace deposits. So the ground gets the most work before any concrete shows up. We compact it, then proof-roll it to find soft spots. Whoever you hire, the bid should spell out at least 4 inches of 4,000 PSI concrete. We quote more as standard: 5 inches of 4,500 PSI concrete over a compacted gravel bed, reinforced with #4 rebar spaced every 18 inches. We saw the control joints to depth the day we pour, or the next morning. Driveway details.
- Shop and barn slabs. A working shop or barn floor takes loads a house garage never sees: equipment, a hoist, a loaded trailer rolling through the doors. We thicken the slab edge under every overhead door and set rebar where the wheel paths run. When a coating or polish is in the building’s future, a vapor barrier goes under the slab. Shop slab details.
- Patios and flatwork. Patios, walks, and approach aprons sit on the same soil and get the same pour spec as a driveway. Only the top changes: broom, trowel, or a decorative finish to match the rest of the place. Patio details.
Garage coatings and polished floors in Nettleton
Garage floor coatings. Every coating starts with diamond-grinding the slab open, so the coating bonds to bare concrete, not a sealed surface. Our flake floor comes in two builds. Epoxy is the standard one. It turns yellow in sunlight, so we save it for shaded garages, not ones with west-facing windows. Polyaspartic is the premium build, and it’s what we’d put in most garages. It cures fast, shrugs off hot tires, and holds up better to the solvents in a working shop. It’s priced on your quote. Garage floor coatings.
Polished concrete. In barndominiums and shop interiors, a polished slab gives you a finished floor with nothing to peel or replace. The shine comes from grinding and hardening the concrete itself, one finer grit at a time, not from a coat on top. Polished concrete details.
Plan the finish at the pour
When a Nettleton slab is meant to be polished or coated, plan the finish at the pour, not after. Our Pour-4-Polish process runs the pour and the finish as one scope of work on one schedule. We write the pour spec for the finish, and one written warranty on our workmanship covers the finished floor.
What does Nettleton’s local stone and subgrade mean for a slab?
There’s no hard-rock quarry anywhere near Nettleton. So the coarse rock in every load is a blend of local Coastal Plain chert gravel and crushed limestone hauled in from Alabama. Most of it comes through B & B Concrete Co’s Verona Plant, about 9 miles away. In a polished slab, that mix shows up as a warm beige cream flecked with tan and rust chert.
A gravel mix drifts more from pour to pour than rock from a single quarry. So when color has to match across several pours, we hold the whole floor to one pit. And because local chert can react with the cement and crack a slab from inside, we confirm the mix fights that reaction (called ASR) before we pour.
See what your Nettleton floor costs online
Answer a few questions about your project and get a ballpark price, no waiting on a callback.
What do a Nettleton driveway, garage coating, and polished floor cost?
Driveways run $6.96 to $16.43 a square foot installed, and other new flatwork runs $5.32 to $15.61. The driveway build costs more because it adds the gravel base and rebar and uses the stronger mix, while a plain slab starts on wire mesh with no base. Garage flake floors run $8.55 to $10.39 a square foot, and polished concrete runs $3.83 to $6.25.
Square footage moves every number. On a coating or polish job, so do the condition of the slab and the system you pick. The online tool gives you a real number without a callback or a site visit first. Nettleton sits about 16 miles south of our team, and the quote counts that travel before you sign.
Which other Lee County cities does Bel Covo serve?
Bel Covo serves the other Lee County cities around Nettleton from the same North Mississippi team: Shannon, Verona, Plantersville, and Tupelo. Our Mississippi service area page lists the rest of the service area.
