Skip to main content
Bel Covo
modern sleek onyx polished concrete

Concrete contractor in Maud, TX

What does concrete flooring cost in Maud, Texas?

Concrete flooring in Maud runs the same ranges as the broader Texas market: polished concrete lands in the low-to-mid single digits per square foot, stained and decorative systems fall in the middle, and high-end epoxy or metallic builds reach the top of the range. Slab condition, square footage, and finish selection all move the real number. The regional breakdown below walks through what actually drives a Maud quote up or down.

Working slabs near Wright Patman Lake

Maud sits a short drive west of Wright Patman Lake. We’re a concrete contractor in Maud, TX, and the work tends to be the working kind: ranch and farm shops, a slab for the boat and the truck, a driveway off US-67. Bel Covo pours and finishes all of it with one crew across Bowie County, so the same hands that set the slab coat or polish it.

Around Maud the calls cluster around a handful of jobs: a fresh driveway, a metal-building or barn slab, a coated garage floor, or a polished interior in a barndominium. Every one of those runs through the same Bowie County crew, pour through finish. Get your price now.

Why does Bel Covo serve Maud?

Texarkana is a 26-mile run west to Maud, which puts the town comfortably inside the daily reach of our Bowie County crew. The work that comes off the lake side and the farm roads here leans rural: detached shops, equipment slabs, ranch driveways, and the occasional polished barndominium floor. That is bread-and-butter work for a crew that pours and finishes in one pass, and pouring and finishing under one roster is exactly how Maud owners dodge the double-contractor scramble.

Concrete services we bring to Maud

We sort a Maud project into three lanes before a number leaves our mouth: poured-from-scratch slabs, applied coating systems, and ground-and-polished interiors. The deciding factors on a Bowie County property are how the slab gets used, how much moisture the ground pushes up, how heavy the traffic runs, and when the finish has to land. Those answers set the crew sequence.

New concrete

Driveways and approaches. The ground around Maud swings between chalk-derived clay that swells and shrinks on the flats and looser Red River terrace alluvium down in the bottoms, and a driveway has to be built for whichever one it lands on. Our spec answers both: a compacted subgrade, fiber mesh through a 4,000 PSI minimum pour, and control joints cut to match the slab thickness so the cracking happens where we want it. Driveway details.

Shop and barn slabs. Detached shops and metal working buildings are some of the steadiest requests we field out of Maud, and a slab meant for tractors, trailers, and a welding bay is a different animal than a two-car garage floor. We add reinforcement for the load, thicken the edges under the overhead-door openings, and lay a moisture vapor barrier whenever the plan is to coat or polish the slab down the road. Shop slab details.

Patios and flatwork. A back patio or a run of sidewalk sits on the same Maud soils a driveway does, so the subgrade prep and the pour spec carry straight over. The finish is where these split off: broom, smooth, or a stamped texture, your call. Patio details.

Concrete finishing

Garage floor coatings. We diamond-grind the slab first, then lay a coating system over it so the coating actually bonds instead of peeling in a year. A chip-broadcast finish covers most home garages around Maud; if the floor belongs to a shop that sees solvents and chemicals, we step up to a polyaspartic built to shrug those off. Garage floor coatings.

Polished concrete. For a Maud barndominium living space or a shop showroom, polished concrete gives you a finished floor with no tile to crack and no carpet to wear out. We grind the gloss into the slab itself, so the shine comes from the concrete, not a coat sitting on top of it. Polished concrete details.

One crew, pour to finish

Pouring a fresh slab in Maud and want it coated or polished afterward? You only book one company. Our Pour-4-Polish process folds the pour and the finish into a single scope, so it is one crew, one schedule, and one workmanship warranty on the finished work.

What should Maud property owners know about the local aggregate and subgrade?

Maud sits on US-67 in Bowie County, a short hop from Wright Patman Lake, and the cement that goes into a shop slab or a ranch driveway out here starts close by. The Ash Grove Cement Company - Foreman Plant supplies the region, grinding Annona Chalk into a bright-white binder paste, and the pebble fraction comes from Red River terrace gravels. On a polished barndominium or shop floor that mix reads as a warm off-white flecked with rounded pebbles that range from golden-brown to pale gray. The chalk-based cement also pulls acid stains and dyes brighter than the same color would land in OKC or DFW, so dial the color spec against that lighter baseline. One scheduling note worth flagging: if a Foreman kiln outage hits, plan cement on a 6-month horizon so a lake-season pour does not stall waiting on supply.

See what your Maud floor costs online

Tell us a few details about the slab, the shop, or the garage, and the tool hands back a ballpark on the spot. No callback to wait on.

How much does concrete cost in Maud?

Concrete flooring cost in Maud comes down to square footage, the condition of the existing slab on coating and polishing jobs, and the system you pick. The online tool returns a real number without a callback or a site visit first. Mobilization to Maud runs about 26 miles west, and the quote itemizes that travel cost so you see it before you commit.

Which other Bowie County cities does Bel Covo serve?

The Texas service area page keeps the 2026 coverage map in one place. Use it to compare nearby city pages and see how far our coverage reaches before you request a quote.

What the concrete in Texas is actually made of

The aggregate story in Texas concrete

Bel Covo’s Texas coverage spans two very different aggregate regions: the Texarkana corridor on the TX-AR border, where chalk-based cement from the Annona Chalk and river gravel produce some of the brightest polished concrete in the region, and north Texas around Wichita Falls, where Permian red beds and imported Ordovician limestone give polished floors a warm desert tint. The Texas concrete flooring hub covers service coverage for both Texas markets in detail.

Why does Texarkana concrete polish so bright?

The Texarkana market runs on Annona Chalk (a Cretaceous, soft, high-purity limestone) for the cement binder itself, paired with river gravel and sand from the Red River and Little River alluvial terraces for coarse and fine aggregate. Cross-border supply from Little River County, Arkansas, is the dominant raw-material pipeline.

Polished floors read as a bright, chalky-white cement paste (due to the Annona chalk source) mottled with tan to buff river-gravel clasts. The floor comes up as a warm off-white field speckled with rounded, golden-brown to pale-gray quartz and chert pebbles. Exposed-aggregate finishes show a distinctly river-rounded, multi-color pebble pattern rather than the angular fractured look of a crushed-limestone pour.

Chalk-derived binders are unusually white compared with standard gray Portland, which makes acid-stain and dye colors pop brighter than they do in the DFW or Oklahoma City metros. River gravel can introduce chert fragments that flash-polish to a glassy finish, creating uneven sheen patches unless the installer densifies aggressively. Gulf Coastal Plain sand is a typical fine-aggregate blend and tends toward a higher quartz content.

Named producers: Ash Grove Cement Company operates the Annona Chalk mine and cement plant in Foreman, Arkansas (Little River County, approximately 30 miles northeast of Texarkana). SBM Rock in Texarkana is the local crushed-stone supplier.

Surface behavior: the chalk-based cement sets slightly lighter than typical Oklahoma or Texas mixes, giving polished floors a cleaner, brighter baseline even without white-cement additives. River gravel coarse aggregate produces a softer, rounded exposed-aggregate look that reads more decorative than industrial. Broom finishes hold texture well because the rounded gravel stays embedded below the tined surface.

How does Wichita Falls aggregate change the polished floor?

North Texas around Wichita Falls runs on fluvial gravels from Quaternary Red River terrace deposits (granule-to-cobble quartzite, quartz, and chert clasts) as coarse aggregate, paired with imported Ordovician limestone from the Arbuckle uplift area (trucked in from southern Oklahoma) for cement-quality and high-spec crushed stone. Local Permian sandstone and mudstone of the Petrolia Formation are too soft for structural concrete and serve mainly as fill.

Polished floors read as a warm, reddish-tinted cement paste (picking up iron from the surrounding Permian red beds used in the sand fraction), studded with well-rounded multi-color quartzite and chert pebbles that range from cream and tan through deep red-brown. The overall read is a rusty, desert-floor palette, warmer and more saturated than a standard gray DFW pour.

The Permian red-bed environment introduces iron-oxide-rich fines into local sand. This can give concrete a pink-to-salmon undertone even without pigment. Rushed curing invites blotchy efflorescence. Gypsum beds up to 25 feet thick run through the red beds, so any unwashed local sand risks sulfate contamination. Reputable mixes use washed Red River sand or Arbuckle-sourced manufactured sand.

Named producers: Bounds Pit in Wichita Falls handles local sand, gravel, and crushed limestone distribution. Martin Marietta Texas operations supply crushed stone into the market; cement-grade limestone is typically trucked from Dolese Arbuckle-area quarries in southern Oklahoma.

Surface behavior: the pink-to-salmon undertone gives polished concrete floors (especially with brown or amber acid stains) unusual depth and warmth, but it fights cool-gray dye palettes. Gypsum-contaminated local sand is the single biggest failure mode for polished floors in this region. Sulfate expansion causes map cracking and pop-outs months after the pour. Broom finishes mask the color variation. Polished floors showcase it and require a color-consistent sand commitment across the entire pour.

What Does Concrete Work in Maud Look Like?

Polished concrete floor in luxury home entryway reflecting chandelier and modern interior designAction Powersports custom logo embedded in glossy black epoxy showroom floorRound Barn polished concrete floor with mirror-like reflections of windows in dark high-gloss finishPolished charcoal concrete floors in open-plan luxury home with stone fireplace and floating staircasePolished dark concrete floor in restaurant bar area with branded bar stools, tap handles and TVsMetallic epoxy floor in dark amber and brown marble swirl pattern with mirror-like gloss finishMetallic epoxy floor with colorful light-ray inlays at Brady Theatre in performing arts venueExpansive sealed concrete floor in double-height residential great room with French doors and transom windowsLow-angle dramatic view of polished concrete floor in large warehouse with column reflectionsQuarter-sawn wood-plank concrete overlay detail showing realistic grain texture and warm tonesHigh-gloss sealed outdoor concrete slab with mirror-like reflection of a boat trailer in daytimePolished concrete floor in Westmoore Community Church lobby viewed from wider angle

How far will Bel Covo travel to pour concrete in Maud?

Bel Covo serves Maud concrete projects within the standard service radius, and our crews are typically 3-6 weeks booked at any given moment. Every quote is itemized to show the cost of each step of the work, including the mobilization that gets equipment on site, so the quote doubles as the order of operations for your project. On accepted work, billing follows those same steps and shows the completion percentage of each as it happens, with nothing buried in a vague lump sum. Call 903-403-3528 for a straight answer in under two minutes.

Which concrete services does Bel Covo offer in Maud?

Our Maud crews handle polished concrete, epoxy and polyaspartic coatings, decorative staining, driveways, patios, and repair work. Every job follows the same Pour-4-Polish process and finish discipline used on our flagship projects. The related links below point to the specific service pages that match common Maud requests.

What questions come up most about Maud concrete?

Does Bel Covo serve Maud directly?

Yes. Maud is inside our Texarkana service area. We pour and finish driveways, shop slabs, garage coatings, and polished concrete for Bowie County properties with the same crew.

What does a concrete driveway cost in Maud?

Maud driveways generally run $6.96 to $16.43 per square foot installed, depending on thickness, reinforcement, and finish. A two-car residential driveway (about 500 square feet) typically lands at $3,650 to $8,650. The online quote tool returns a ballpark for your specific project.

Can you pour and coat a garage floor in the same scope?

Yes. Our Pour-4-Polish process handles the pour, the cure window, and the coating as one scope of work. One crew, one schedule, one warranty.

Is Maud too small or too far for Bel Covo?

No. Maud and the surrounding Bowie County area are part of our regular Texarkana service area. Rural shops, barndominiums, ranch and farm slabs, and lake-area builds are core work for us, not exceptions.

Ready to transform your floor?

Get a free, no-obligation quote for your project.

Bowie County, Texas

See concrete work across Bowie County, Texas →