Concrete cost per square foot in Oklahoma runs $5.32 to $15.61 for a 4-inch slab on our calculator in 2026. Driveways run $6.96 to $16.43, and patios run $5.30 to $17.72. The low end is a light build with a plain broom finish on ground that’s ready to pour. The top counts the extras: rebar, a stamped finish, or an old slab to tear out first.
Most of that spread comes down to how thick the slab is, the steel in it, the dirt under it, and the finish on top. Our calculator uses the same rates in OKC, Tulsa, and the small towns between. Only the drive to your site changes with your address.
What does each type of concrete project cost?
| Project Type | Oklahoma Cost ($/SF) | Typical Project Size | Detailed Pricing Guide |
|---|---|---|---|
| Driveway (broom finish, 4”) | Base build $8.64 | 400 - 800 SF | Driveway cost guide |
| Driveway (stamped) | Driveway price + $3.93 for the stamp | 400 - 800 SF | Driveway cost guide |
| Patio (broom finish) | Base build $6.55 | 200 - 500 SF | Patio cost guide |
| Patio (stained/colored) | Patio price + $1.52 for color mixed in | 200 - 500 SF | Patio cost guide |
| Garage slab (4 - 6”) | Base build $5.55 | 400 - 800 SF | Garage slab cost guide |
| Barndominium slab | Base build $5.55, plus thickness and rebar | 1,500 - 4,000 SF | Barndo slab cost guide |
| Sidewalk (4”) | Base build $5.55 | 100 - 400 SF | Sidewalks & walkways |
| Interior slab (4”) | Base build $5.55 | 500 - 2,500 SF | Interior slabs |
| Commercial slab (6”) | Base build $5.55, plus the thicker pour | 2,000 - 20,000 SF | Commercial flatwork |
Every slab row prices off one base build: a 4-inch slab with wire mesh, a broom finish, and a spray-on cure. Thicker concrete, rebar, and a vapor barrier add to it.
Our slab line has two builds. The standard build is a 4-inch broom finish with basic ground prep. The SPEC build of our Slab Boss Pour is made for a coating or a polish: a 4,000+ PSI mix, poured extra flat, and cured wet for 7 days. The SPEC placement runs $0.64 a square foot more than standard placement, and the wet cure adds $0.14 over a spray-on cure. For medians from real quotes, not a national calculator, see our cost study across 245 Oklahoma quote records.
A 20x20 slab is 400 square feet, and it runs $2,250 to $7,800 before the drive cost, which is our trip out to your site. A plain broom finish sits at the low end. A stamped finish adds $3.93 a square foot and moves it toward the top. If the site needs grading, we price that dirt work after we see the ground.
What moves the price?
Six things move a concrete price: thickness, the finish, ground prep, tear-out, steel, and access.
How thick does it need to be?
A 4-inch slab takes about 1.2 cubic yards of concrete per 100 square feet. Go to 6 inches, and the concrete climbs 50%.
People ask a lot what a yard of concrete costs in Oklahoma. We don’t price by the yard. Our price is for the finished slab by the square foot, with the concrete, the forms, and the finishing in one number. So the yard price from a plant is only part of what you’d pay.
Pick the thickness by what the slab has to carry:
- Driveways, patios, and sidewalks: most are 4 inches.
- Garage slabs under heavy equipment, shop floors, and barndominium slabs: these usually want 5 to 6 inches, with thicker concrete along the edges.
- A floor that will be polished or coated: ask for the SPEC build above.
What does the finish add?
Each finish comes in the base price, adds to it, or has its own price:
- Broom finish: in the base price
- Integral color, mixed into the whole batch: adds $1.52 a square foot on a patio
- Stained concrete, an acid or water-based stain put on after the cure: $2.19 to $6.29 a square foot
- Stamped concrete, patterns pressed into wet concrete: adds $3.93 a square foot
- Polished concrete, ground with diamonds and hardened with a densifier after the cure: $3.83 to $6.25 a square foot
Polished lands wide, because the slab’s condition decides how much grinding it takes. Our polished concrete cost study found a median of $5.69[1] a square foot across 94 Oklahoma quotes. That’s a better planning number than either end of the range.
What does ground prep cost?
Basic subgrade prep, getting the dirt under the slab ready, comes in the placement price. Extra dirt work doesn’t. Oklahoma red clay takes more work than sandy ground, so grading, packing the soil, or fixing drainage gets priced per job once we’ve seen the ground. On a driveway, our price already includes 4 inches of crushed gravel, packed down in layers under the slab.
A vapor barrier is a plastic sheet under the slab that stops ground moisture. It belongs under interior slabs and under any slab that’ll carry a floor coating. A 10-mil sheet adds $0.24 a square foot. A heavier 15-mil Stego Wrap, made to stop the moisture that lifts coatings, adds $0.60.
Watch for quotes that skip surface prep
A quote that skips ground prep comes in lower, so ask what it skipped. Settling, cracking, and drainage trouble almost always trace back to poor subgrade work. Grading the site and packing the soil are what keep a slab from doing that.
What does tearing out old concrete cost?
Tearing out an old slab runs $2.30 a square foot on our calculator, with hauling it off included. The national market range runs $1 to $3[2]. Our price assumes a 4-inch slab with no steel in it. A thicker slab, or one full of rebar, can cost more to break out.
Reinforcement
Steel holds cracks tight so the pieces don’t drift apart. Each option adds to the square-foot price:
| Reinforcement Type | Cost Adder ($/SF) | Best For |
|---|---|---|
| Fiber mesh | $0.32 | Patios, sidewalks, light-duty slabs |
| Wire mesh (6x6 W1.4) | $0.63 | Garage floors, light-duty driveways |
| Rebar (#4 on 18” centers) | $2.12 | Shop slabs, barndominiums, commercial |
Wire mesh comes in our default slab build. Pick rebar, and it takes the mesh’s place.
Access
A backyard patio or a narrow lot may need a line pump when the ready-mix truck can’t reach the pour. The pump truck and its driver run $1,780 a pour.
Is concrete actually cheaper in Oklahoma?
Against the coasts, yes. Oklahoma prices in 2026 run 5% to 15% below coastal states. Lower labor rates and shorter drives explain most of that gap, and lots of local contractors chasing the same work explain the rest.
Against national ranges it’s closer, and some of our lines land above them, so compare job by job.
| Project Type | Oklahoma $/SF | National $/SF |
|---|---|---|
| Driveway (broom finish) | Base build $8.64 | $5 to $8[3] |
| Driveway (stamped) | Base build plus the stamp, $12.57 | $10 to $20[4] |
| Patio (stained/colored) | Patio price + $1.52 for color | $8 to $18[5] |
| Sidewalk | Base build $5.55 | $6 to $12[6] |
| Demo/removal | $2.30 | $1 to $3[2] |
When national pricing guides mislead
Most online cost calculators use national averages that skew high for Oklahoma. A national cost site can show a stamped driveway range that runs well past ours. Check any number like that against a local price before you plan around it.
Does the season change the price?
It does at the cold end of the year. Pours below 40 degrees F cost 10% to 20% more. Protecting the cure takes blankets, heated tents, and accelerators, which are add-ins that speed up the set. None of that is padding. Concrete that freezes before it cures never gets its strength back.
Spring and fall are the best-value seasons for concrete work in Oklahoma. If your job can wait a few weeks, it’s worth the wait.
What do Oklahomans actually buy?
Across the same 245 Oklahoma quote records, polished concrete is the most-asked-for service, at about 38% of the quotes. Epoxy and resinous coatings come next at about 33%, then sealed concrete at 13%, decorative overlays at 11%, and stained concrete at 4%.
So more than two-thirds of buyers want a hard-wearing finished floor, not bare concrete. That matters on pour day, because those finishes want a slab poured for them.
One contractor or two?
Split the pour and the finish between two companies, and the totals land close. What the split costs you is the second trip and the rework.
Two trips. You pay for two setups, and two crews stage their gear on the same site weeks apart.
Gaps in the handoff. The finish crew gets every choice the pour crew made, but none of the reasons. If the slab isn’t flat enough or the cure went wrong, the problem is real, nobody owns it, and somebody has to fix it before the finish goes down.
The polish price. When we pour a SPEC slab and polish it on the same quote, the field and edge polishing run 30% less than our regular polish price.
Pour-4-Polish covers ground prep through the final finish: one spec, one schedule, and one company answering for it.
How do you get an accurate number?
Online calculators give you a ballpark. A real quote counts your soil, access, tear-out, and finish. Four steps get you there:
- Measure the area. Multiply length by width. Break odd shapes into rectangles instead of guessing.
- Pick a thickness and a finish. A 4-inch broom-finish slab is the baseline everything else prices against.
- Note what’s there now. An old slab to tear out, or a backyard the truck can’t reach, changes the number.
- Price it. Our quote tool prices Oklahoma concrete jobs in about 2 minutes. It lists ground prep, steel, the pour, the finish, and cleanup on separate lines, so you can see which one drives your number.
Your price is the base build, plus the options you pick, plus the drive. Rather talk to a person? Call (888) 852-3528.
Online pricing, right now
Answer a few questions about your job and get an itemized price. No obligation, no pressure.
Related cost guides
- Concrete driveway cost
- Concrete patio cost
- Garage slab cost
- Barndominium slab cost: thickness, reinforcement, and subgrade drive this one hardest
- Concrete slab cost: garage slabs and shop pads
- 40x60 shop slab cost
- Concrete overlay cost: resurfacing without tearing out
- Concrete leveling cost: lifting a settled slab
- Concrete repair cost: crack and spalling work
Related services
- Sidewalks and walkways
- Interior slabs: slabs poured inside a building
- Commercial flatwork: commercial slabs, most poured 6 inches thick
- Pour-4-Polish: one spec from the pour through the polish
- Get your price now
Where these market figures come from
Every price on this page that is not ours is listed here. Our own rates carry no number: they link straight into the quote tool.
- Median polished concrete floor cost, Oklahoma: $5.69 per SF. Bel Covo polished concrete cost study 2026, retrieved 2026-09-30. Median across 94 Bel Covo polished concrete quote records in Oklahoma dated May 2021 to April 2026, interquartile range $4.80 to $6.67.
- Old concrete removal and haul-off (national range): $1 to $3 per SF. Family Handyman, "Driveway Replacement Cost" (updated 2024-02-04), retrieved 2026-10-22. Quoted as published for removing an old concrete driveway: "The removal cost is typically $1 to $3 psf." Newer slab-removal guides run higher (This Old House 2026: $2 to $6).
- Plain broom-finish concrete driveway, installed (national range): $5 to $8 per SF. Concrete Network, "How Much Does a Concrete Driveway Cost?" (updated 2026-01-13), retrieved 2026-10-22. Quoted as published for the plain tier ("may have a basic broom or rock salt finish"): "$5 to $8 per square foot".
- Stamped concrete driveway, installed, basic to mid-range (national range): $10 to $20 per SF. Concrete Network, "How Much Does Stamped Concrete Cost?" (reviewed 2026-01-26), retrieved 2026-10-22. Published 640 SF two-car driveway totals: basic $6,400 to $8,960, mid-range $8,960 to $12,800, so $10 to $20 per SF. High-end work runs past $20 ("$20+ per square foot").
- Colored or decorative concrete patio, installed (national range): $8 to $18 per SF. Concrete Network, "Concrete Patio Cost" (updated 2026-01-20), retrieved 2026-10-22. Published tiers: simple design (one coloring method) $8 to $11 per SF, custom design (two or three colors or a border) $11 to $18 per SF, joined as $8 to $18.
- Concrete walkway or sidewalk, installed (national range): $6 to $12 per SF. Concrete Network, "Concrete Prices 2026" (updated 2026-07-14), retrieved 2026-10-22. Quoted as published: "Walkway Cost $6 to $12 per sq. ft."
