Skip to main content
Bel Covo
modern sleek onyx polished concrete

Concrete contractor in Crump, TN

What does concrete flooring cost in Crump, Tennessee?

Concrete flooring in Crump runs the same ranges as the broader Tennessee market: polished concrete lands in the low-to-mid single digits per square foot, stained and decorative systems fall in the middle, and high-end epoxy or metallic builds reach the top of the range. Slab condition, square footage, and finish selection all move the real number. The regional breakdown below walks through what actually drives a Crump quote up or down.

Cabin and shop slabs in Hardin County

We’re a concrete contractor in Crump, TN, at the US-64 and SR-22 junction. The work splits two ways: cabin and riverfront flatwork near Pickwick Landing, and working-building slabs on the rural upland above the Tennessee River. One crew handles both. We do driveways, shop pads, garage coatings, and polished concrete for Hardin County, so you never hire a second crew months after the slab cures. Get your price now.

Why does our North Mississippi team serve Crump?

Crump sits at the US-64 and SR-22 junction on the west bank of the Tennessee River, about 78 miles north of our North Mississippi team. The river shapes the work we see here. Owners finishing a lake cabin near Pickwick Landing State Park need riverfront flatwork that handles seasonal moisture from the Tennessee River floodplain, while farmers and tradespeople on the higher ground west of town need shop and barn pads built for rolling equipment and heavy point loads.

What kind of concrete work comes from Crump properties?

Hardin County jobs follow from the terrain. River-bottom parcels near the Pickwick pool generate vacation-cabin slabs, covered-porch flatwork, and second-home driveways where a moisture test before any coating is the smart call. The upland ground above the channel produces barndominium pads, detached shop floors, and working driveways on agricultural properties. Civic and commercial properties along the US-64 corridor make up the third category.

New concrete: driveways, shop slabs, and flatwork

Driveways on Hardin County properties call for a compacted subgrade, a 4,000 PSI minimum pour with fiber mesh reinforcement, and control joints spaced to the slab thickness. Driveway details.

Shop and barn floors here carry loads that no residential garage sees: a 5-inch slab minimum, thickened edges at door openings, and a vapor barrier under any slab that will receive a coating or polish later. Shop slab details.

Outdoor flatwork on lake-cabin lots needs the same care on subgrade prep as driveways, because the Tennessee River bottomland holds moisture differently than upland soil. Patio details.

Concrete finishing: coatings and polished floors

Garage and shop floors in Crump start with diamond-grinding surface prep, followed by the polyurea or polyaspartic system. Chip broadcast suits most residential garages; chemical-resistant polyaspartic is the call for a working shop. Garage floor coatings.

Polished concrete suits Crump barndominium interiors and finished shop spaces where tile or carpet is not practical. The surface shine is ground directly into the slab, not applied as a topcoat. Polished concrete details.

Pour and finish as one scope

Owners building a new shop or cabin shell can skip the two-contractor handoff. Our Pour-4-Polish process treats the pour and the coating or polish as a single scope: one crew manages the slab, the cure window, and the finish. One workmanship warranty covers the labor on both.

What stone does Hardin County aggregate come from?

Hardin County sits in the Tennessee River’s Western Valley where the Fort Payne Formation supplies the regional chert. That bedded chert and the river-terrace chert gravel it weathers into dominate the surface geology at higher ground, grading to soft alluvium near the Tennessee River channel itself. APAC-Mississippi - Corinth, in Alcorn County, supplies crushed stone into this part of West Tennessee. Because Fort Payne chert contains reactive silica, polished pours here specify ASTM C1260 or C1567 alkali-silica screening, Class F fly ash, and low-alkali cement to keep the finish stable long-term. A polished slab on Fort Payne chert aggregate reads as warm cream with tan and rust highlights rather than flat gray, which is a natural product of the local stone.

See what your Crump floor costs online

Answer a few questions about your project and get a ballpark price, no waiting on a callback.

How much does concrete flooring cost in Crump?

Installed driveways in Crump run $6.96 to $16.43 per square foot, and a standard two-car driveway of about 500 square feet lands at $3,650 to $8,650. Shop slabs and polished interiors price by slab thickness, finish level, and square footage. Our crews are typically 3-6 weeks booked. The online quote tool produces a project-specific figure without a callback, and mobilization covers 78 miles from our North Mississippi team. That cost is counted into the quote before you commit.

Does moisture near the Tennessee River require extra prep before coating?

Yes. River-bottom parcels near the Pickwick pool carry higher vapor drive than upland lots. Any slab on that floodplain ground gets a moisture reading before the coating crew starts; if the test shows vapor emission above the system threshold, we add a moisture-mitigation primer before the coating goes down. Skipping that step is the most common reason coatings delaminate in riverfront settings.

Which other Hardin County cities does Bel Covo serve?

The Tennessee service area page carries the full 2026 coverage map for West Tennessee, including nearby Hardin County cities.

What the concrete in Tennessee is actually made of

The aggregate story in West Tennessee concrete

Memphis and West Tennessee concrete uses Mississippi River chert gravel and sand from local pits. Crushed limestone comes in by rail or barge from Middle Tennessee (the Fort Payne Formation and the Mississippian limestone above it). West Tennessee has no hard-rock limestone quarry. Its bedrock sits under hundreds of feet of loose Coastal Plain sediment, so any coarse limestone in a Memphis slab has come 150 miles or more. Our Tennessee concrete flooring page covers where we work.

What gives Memphis polished floors their multi-toned cream look?

The river gravel is old Devonian and Mississippian chert, worn round over hundreds of miles of river. So the pebbles run gray, brown, red, cream, and black. No crushed-limestone area has that range. A polished floor reads as a warm cream to buff, peppered with tan, honey, gray, and reddish-brown pebbles. Ground and honed, it looks speckled, not one clean color. Darker gravel mixes lean toward a light khaki. A mix made with shipped-in limestone polishes closer to an even pale gray, the quieter choice.

Weathered chert can be porous, and it can react with cement and crack a slab from inside (alkali-silica reaction). Good producers screen for it. The loess bluffs (wind-blown silt) east of the river add silty sand to local mixes. That can raise how much water a hot-weather pour needs.

Local producers and cement

Memphis Stone and Gravel, part of Granite Construction, is the biggest local producer. It runs 3 sand and gravel mines in Mississippi River deposits and is building a fourth. Cement comes down the river by barge from Cape Girardeau and Festus, Missouri, to the Buzzi Unicem USA terminal at the Port of Memphis. No cement kiln runs in West Tennessee.

Does the river aggregate create problems for stain or coating finishes?

For stain, yes. Chert pebbles take acid stain poorly while the cement around them takes it well, so stained floors here come out mottled. A broom finish hides the gravel, though round gravel makes a tight cream harder to bring up. Polish shows the chert loud and clear. That’s character in a home or a small shop. On a big commercial floor meant to look even gray, it’s busy.

So pick by the look you want:

  • Speckled and many-toned: polish a river-gravel slab.
  • Even pale gray: ask for a limestone mix before the pour. An old slab keeps the look it has.
  • One even color on an existing slab: an epoxy coating over the ground slab covers the gravel.

What about Nashville, Knoxville, and Chattanooga?

Middle and East Tennessee have crushed stone quarries close to town: Rogers Group’s Whites Creek quarry in Nashville, Vulcan Materials’ Dixie Lee quarry in Farragut near Knoxville, and Martin Marietta and Vulcan quarries in Chattanooga. Our Nashville, Knoxville, and Chattanooga teams work that side of the state. A mix made with that crushed limestone polishes closer to an even pale gray than the river-gravel floors above.

What Does Concrete Work in Crump Look Like?

Ground-level close-up of completed white vinyl chip epoxy floor showing chip texture and depth with service counter visible in distanceCompleted white vinyl chip epoxy floor in Ladd's showroom with worker in background and Club Car branding bannersCompleted white vinyl chip epoxy floor at Ladd's showroom looking toward service counter and green accent wallReflective brown polished concrete floor with fully exposed stone aggregate.Glossy brown polished concrete floor with exposed aggregate beside built in cabinets.full exposure polished concrete floor in a residential great room by Bel CovoPolished concrete floor in luxury home entryway reflecting chandelier and modern interior designAction Powersports custom logo embedded in glossy black epoxy showroom floorRound Barn polished concrete floor with mirror-like reflections of windows in dark high-gloss finishPolished charcoal concrete floors in open-plan luxury home with stone fireplace and floating staircasePolished dark concrete floor in restaurant bar area with branded bar stools, tap handles and TVsMetallic epoxy floor in dark amber and brown marble swirl pattern with mirror-like gloss finish

How far will Bel Covo travel to pour concrete in Crump?

Bel Covo serves Crump concrete projects within the standard service radius, and our crews are typically 3-6 weeks booked at any given moment. Every quote is itemized to show the cost of each step of the work, including the mobilization that gets equipment on site, so the quote doubles as the order of operations for your project. On accepted work, billing follows those same steps and shows the completion percentage of each as it happens, with nothing buried in a vague lump sum. Call 662-356-3528 for a straight answer in under two minutes.

Which concrete services does Bel Covo offer in Crump?

Our Crump crews handle polished concrete, epoxy and polyaspartic coatings, decorative staining, driveways, patios, and repair work. Every job follows the same Pour-4-Polish process and finish discipline used on our flagship projects. The related links below point to the specific service pages that match common Crump requests.

What questions come up most about Crump concrete?

Does Bel Covo serve Crump directly?

Yes. Our North Mississippi team covers Crump and the surrounding Hardin County area, dispatching about 78 miles north to pour and finish driveways, shop slabs, garage coatings, and polished concrete.

What does a concrete driveway cost in Crump?

Crump driveways generally run $6.96 to $16.43 per square foot installed, depending on thickness, reinforcement, and finish. A two-car residential driveway (about 500 square feet) typically lands at $3,650 to $8,650. The online quote tool returns a ballpark for your specific project.

Can you pour and coat a garage floor in the same scope?

Yes. Our Pour-4-Polish process handles the pour, the cure window, and the coating as one scope of work. One crew, one schedule, one workmanship warranty on the labor.

Does the Fort Payne chert under Hardin County affect a polished floor's color?

It does. Hardin County sits on Fort Payne chert and river-terrace chert gravel, so polished slabs tend to read as warm cream with tan and rust flecks rather than a uniform gray. We account for that in the finish spec from the start.

Last updated:

Ready to transform your floor?

Get a free, no-obligation quote for your project.