Epoxy flooring cost in Tennessee (2026 pricing)

What does epoxy flooring cost in Tennessee?

Epoxy flooring cost in Tennessee runs $6.08 to $10.17 a square foot with us, installed. A two-car garage of 400 to 500 square feet comes to $4,000 to $4,900 for our flake floor, before the drive cost. That’s our trip to your address. A floor that small runs above the per-foot range, since setup spreads over fewer feet. Where your job lands depends on the metro, the slab’s age, and the system you pick.

Those prices cover grinding, the coats, the topcoat, grit for grip, and cleanup. Old coating removal, a moisture barrier, or repair to the slab goes on top when it’s needed. For garage systems side by side, see the Tennessee garage floor coating cost page.

What does each epoxy system cost?

RESA is our name for a resin floor with something cast into it. RESA Flake has color flakes, RESA Quartz has colored quartz sand, and RESA Metallic has swirled metallic color. Once the slab is sound, the system is the biggest choice you control.

The range above includes setup. A single rate can sit a little under it. Inside each system, the slab moves the price. A clean builder slab in Spring Hill or Farragut needs only standard grinding. A loess-capped Memphis warehouse floor, or a pre-1980 Knoxville Old City slab with glue and curing residue, needs prep before the base coat.

How does epoxy flooring cost change across Tennessee’s four metros?

Our per-foot rates are the same statewide, and crews come from our nearest Tennessee team. In Williamson County, Franklin, Brentwood, and Spring Hill pick flake and metallic most often. Loft conversions in the Gulch, Germantown, and East Nashville come with pre-1980 tile glue that has to come off first. Memphis runs two kinds of jobs. There’s suburban homes in Germantown, Collierville, and Cordova, and heavy commercial floors across Shelby, Fayette, and Tipton counties. Loess keeps older Memphis slabs damp, so the moisture barrier shows up on far more Memphis quotes than East Tennessee ones. Up in East Tennessee, Oak Ridge brings chemical-resistant lab floors. One Memphis job shows what that money buys: the epoxy flake showroom floor at Ladd’s Turf Golf. Its page has 32 photos of the finished floor. For the national view by system, see our national epoxy flooring cost page.

What raises the price on a Tennessee epoxy floor?

Surface prep. It’s the biggest swing. A builder slab with a vapor barrier under it needs standard diamond grinding to CSP 3. That’s the roughness grade a coating needs to grip. An old Memphis cotton-row warehouse, a Gulch loft, or an Old City Knoxville slab can carry tile glue, old coating, or curing film. Taking that down to bare concrete runs $1.80 a square foot. Old black glue may need an asbestos test first, and asbestos work goes to a licensed contractor.

Size. Setup costs about the same on any floor. So a 200 sf mudroom costs more per foot than a 5,000 sf warehouse bay.

Moisture. West Tennessee is where moisture bites. Loess-capped Shelby and Tipton county slabs and pre-1990 Memphis stock often read 4 to 8 lbs on the ASTM F1869 calcium chloride test. Above 3 lbs, we put down a moisture barrier at $1.80 a square foot. We check every slab. When one shows a warning sign, like a pre-1990 pour or low river ground, it gets both the calcium chloride test and an RH probe before the base coat.

Humid summers. Memphis air above 70 percent humidity can leave a cloudy blush on epoxy as it cures. So in a West Tennessee summer, we close the bay and run a dehumidifier. We may lean on polyaspartic, too.

The drive cost. It sits on its own line, never folded into the rate. The online quote tool figures it from your address.

Polyaspartic topcoat for Tennessee heat and freeze-thaw

Tennessee hands a coating two different problems. In the West, Memphis stacks heat, humidity, and a UV index of 9 into slab temperatures near 130 degrees in the afternoon. Plain epoxy yellows in that sun, and a hot tire can soften it and peel it up. Polyaspartic holds past 200 degrees F. In the East, the Knoxville and Chattanooga ridges see more freeze-thaw than Memphis does. Rigid epoxy can split at the joints there, and polyaspartic flexes with them.

That’s why polyaspartic is our garage pick in RESA Flake. Metallic floors get a clear urethane topcoat, and quartz floors get a clear topcoat. Polyaspartic adds some cost, and it stretches color life from under two years to 15-plus. Our polyaspartic vs epoxy garage floor post walks through the full tradeoff.

Why quality Tennessee epoxy installations cost what they do

Two bids on the same two-car garage can sit thousands of dollars apart. Four things explain the gap.

1. Prep. We diamond grind to CSP 3. Acid etching lifts inside two years, and it does nothing about the glue on a Memphis or Nashville loft slab.
2. Resin. True 100 percent solids resin cures to 20-plus mils. A 40 to 50 percent solids kit cures to 3 to 5.
3. Moisture. Skip the moisture check on an old West Tennessee slab, and if it reads over 3 lbs, the floor blisters within a year.
4. Topcoat. Polyaspartic or urethane, matched to the room. Western sun and eastern freeze-thaw each punish a floor without one.

How to get an accurate Tennessee epoxy flooring quote

Start with the online quote tool. It takes about 2 minutes. Enter the floor size, your metro, the system you want, and any slab warning signs. You get an installed range, with the drive to your address on its own line. Memphis warehouse floors, Oak Ridge lab work, and any slab that may need a moisture test get a no-charge visit on site first.

Related pages

• Epoxy flooring in Tennessee: the full service, the chemistry, and our process
• Tennessee state hub: all services, metros, and city pages
• Garage floor coating cost in Tennessee: garage systems priced side by side
• Polished concrete cost in Tennessee: grind-and-polish pricing across the state
• National epoxy flooring cost: systems compared
• Build a price estimate: a line-item quote in 2 minutes